Hydraulic Torque Wrench Squre Drive Type, Hydraulic Torque Wrench Hex Type, Slugging Wrenches, Heavy Duty Structural Wrenches, Mumbai, India
Translate A Website
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 
 
 
 

Non Sparking Tools

 
Non Sparking Tools
Spanners & wrenches
Hammers
Knifes, Chisels & Bars
Screwdrivers & Pliers
Sockets, Impact Sockets
 
We are one of leading manufacturers of non-sparking tools and will present you with this catalogue an extensive range of products, which can be taiored your special needs.
Tristar Non-sparking Safety Tools are used extensively throughout the world in the following industries:
* Oil and gas, off-shore and on-shore * Flammable material manufacturing
* Public Utilities - Gas, Electric * Aircraft and Missile Factories
* Petro-chemical * Explosives manufacturing
* Grain handling * Paint Manufacturing
* Pipeline Construction * Armed Forces
* Pharmaceuticals * Shipyards
* Tankeres * Airports
* Non-magnetic applicationns  
 
... and many other where sparks are a potential fire or explosion hazard.
Tristar Non-sparking safety tools can provide a vital extra margin of safety under these conditions. This margin could be crucial in protecting personnel and installations from disaster.

Features :

* Greater safety personnel and installations
* Strong and long lasting
* Comprehensive standard range
* Corrosion resistant
* Special tools made to customers own designs
 
When conventional steel tools are used in potentially combustible steel tools are used in potentially combustible or explosive atmosphers, dangerous sparks may be accidentally created by tools slipping or being struck against hard surfaces.
 

The only safe way to eliminate fires and explosions in hazardous envirnments is to make sure that NO inflammable materials are present when using metal hand tools. In practice this is rarely possible and therefore plant managers and safety officers insist that SPARK RESISTANT tools are used for low-cost protection.

For metallurgical and technological reasons it is almost possible to manufacture spark resistannt tools to the same hardness etc. as high alloy steel. Frequent re-dressing to remove embedded particles of steel or other substances which could cause sparks is essential. Misuse must be avoided, e.g. extending the handle length of wrenches with piping or using air hammer tools as a crow bar.

All Tristar Non-sparking safety tools in this
catalogue are manufactured from Copper-Beryllium or Aluminium Bronze. Special precautions are to be taken when resharpening and grinding Copper-Beryllium or Aluminium Bronze. Special precautions are to be taken when resharpening and grinding Copper-Beryllium tools. Directions are available upon request.

TRISTAR Non-Sparking Safety Tools are guarnteed against defects in material and workmanship. Tools which fail because of misue, international or uninternational, or for any reason other than stated above, cannot be replaced free of charge.

 
Instructions for use : Non-sparking tools have to be softer than convential tools. For this reason the use of non-sparking tools has to be carry out with special care. Overstraining has to be avoid. The use of non-sparking tools must not be the only preventive measure in areas of fire and explosion risk. For an extensive pretection of staff and equipping, please follow the instructions of your professional associations.

Follow-up treatment: If you want to make a follow-up treatment on the tools (e.g. resharpen) by youreself, we would be pleased to send you our technical instruction.

Gurantee : TRISTAR Tools contain a guarantee against mistakes in material and producing. Howver, this guarantee does not include damages caused by an improper handling. Wreserve the right to any changes in material, workmanship and design without notice.
 
 
Spanners & wrenches Hammers Knifes, Chisels & Bars Screwdrivers & Pliers Sockets, Impact Sockets
 
 
 
Tristar Impact Sockets & Accessories
Impact Sockets & Accessories
Impact Sockets 1/4” Square Drive | Impact Sockets 3/8” Square Drive | Impact Sockets 1/2” Square Drive | Impact Sockets 3/4” Square Drive
Impact Sockets 1” Square Drive | Impact Sockets 1.1/2” Square Drive | Impact Sockets 2.1/2” Square Drive | Impact Sockets 3.1/2” Square Drive
 
Automotive Sockets
Automotive Sockets 1/4” Square Drive | Automotive Sockets 3/8” Square Drive | Automotive Sockets 1/2” Square Drive | Automotive Sockets 3/4” Square Drive | Automotive Sockets 1” Square Drive | Automotive Sockets 1.1/2” Square Drive | Automotive Sockets 5” Splined Socket | Bud Wheels Impact Sockets | Bearing Nut Sockets | Lug Nuts Sockets
 
Turbine Tools | Slugging Wrenches | Torque Wrenches | Torque Multiplier
 
 
 
Home - About Us - Products - Manufacturing Process - Services - Clients - Video - Downloads - News & Events - Contact - Enquiry
Designed & Hosted by : MID  Promoted by : GID